Redis Enterprise for Kubernetes 7.4.2-12 (May 2024) release notes

This is a feature release with a new version of Redis Enterprise Software support for persistent volume expansion.

Redis Enterprise for Kubernetes

Highlights

This release has many enhancements, most notably support for persistent volume expansion in the REC. Also, some essential changes in module handling support newer capabilities prompted by changes in the underlying Redis Enterprise around versioning.

New in this release

Enhancements

• Support for persistent volume expansion in the REC (RED-84018)
• Ability to specify Redis version in REDB spec (RED-103945)
• Updated supported distributions (RED-119711)
• Ability to enable modules via REDB without specifying a module version (RED-116082)
• Dual Stack configuration support (RED-121897)

Resolved issues

• Fixed case of client certificates being updated in a loop (RED-121633)
• Fixed issues disabling replication on REDB (RED-122721)

API changes

CRD

Field

Change

Description

REC

spec.persistentSpec.enablePersistentVolumeResize

ADD

Set to "true" to allow changes in volumeSize after REC creation (for sizing up only)

REC

status.persistenceStatus

ADD

Indicates the status of persistent volume expansion

REC

spec.redisEnterpriseIPFamily

ADD

Configure which IP family to use when Kubernetes cluster has Dual Stack networking enabled

REDB

spec.moduleList[x].version

CHANGE

Field is no longer mandatory

REDB

spec.upgradeSpec

ADD

New field allows configuration of module upgrade settings

REDB

spec.redisVersion

CHANGE

Now allows setting version numbers (Major.Minor)

Version changes

For a list of fixes related to CVEs, see the Redis Enterprise 7.4.2-129 release notes.

Breaking changes

The following changes included in this release affect the upgrade process. Please read carefully before upgrading.

ValidatingWebhookConfiguration

Versions 6.4.2-4 and later include a new ValidatingWebhookConfiguration resource to replace the redb-admission webhook resource. To use releases 6.4.2-4 or later, delete the old webhook resource and apply the new file. See upgrade Redis cluster for instructions.

OpenShift SCC

Versions 6.4.2-6 and later include a new SCC (redis-enterprise-scc-v2) that you need to bind to your service account before upgrading. OpenShift clusters running version 6.2.12 or earlier upgrading to version 6.2.18 or later might get stuck if you skip this step. See upgrade a Redis Enterprise cluster (REC) for instructions.

Upcoming Changes

• Future Redis Enterprise images will be UBI9-based only, without support for Ubuntu-based images.

Supported distributions

The following table shows supported distributions at the time of this release. You can also find this list in Supported Kubernetes distributions.

✅ Supported – This distribution is supported for this version of Redis Enterprise Software for Kubernetes.

⚠️ Deprecated – This distribution is still supported for this version of Redis Enterprise Software for Kubernetes, but support will be removed in a future release.

❌ End of life – Support for this distribution ended.

Any distribution not listed below is not supported for production workloads.

Kubernetes version

1.24

1.25

1.26

1.27

1.28

1.29

Community Kubernetes

⚠️

✅

✅

✅

Amazon EKS

⚠️

✅

✅

✅

Azure AKS

⚠️

✅

✅

✅

Google GKE

⚠️

✅

✅

✅

✅

Rancher RKE2

❌

✅

✅

✅

VMware TKG 2.2

⚠️

⚠️

VMware TKG 2.3

✅

✅

✅

VMware TKG 2.4

✅

✅

✅

OpenShift version

4.11

4.12

4.13

4.14

4.15

⚠️

✅

✅

✅

✅

VMware TKGI version

1.15

1.16

1.17

1.18

❌

✅

✅

✅

Downloads

• Redis Enterprise: redislabs/redis:7.4.2-129
• Operator: redislabs/operator:7.4.2-12
• Services Rigger: redislabs/k8s-controller:7.4.2-12

OpenShift images

• Redis Enterprise: registry.connect.redhat.com/redislabs/redis-enterprise:7.4.2-129.rhel8-openshift
• Operator: registry.connect.redhat.com/redislabs/redis-enterprise-operator:7.4.2-12
• Services Rigger: registry.connect.redhat.com/redislabs/services-manager:7.4.2-12

OLM bundle

Redis Enterprise operator bundle : v7.4.2-12.0

Known limitations

New limitations

• Missing endpoint for admission endpoint (rare) (RED-119469) Restart the operator pod.

• PVC expansion is not supported when using Redis on Flash (Auto Tiering) (RED-165770) Do not enable enablePersistentVolumeResize if your REC uses redisOnFlashSpec as this will result in conflicts.

Existing limitations

• The REDB "redisVersion" field can’t be used for memcached databases(RED-119152)

• When modifying the database suffix for an Active-Active database, while the service-rigger is in a terminating state, the services-rigger will delete and create the ingress or route resources in a loop (RED-107687) Wait until the services rigger pod has finished to terminate it.

• REAADB changes might fail with "gateway timeout" errors, mostly on OpenShift (RED-103048) Retry the operation.

• Creating two databases with the same name directly on Redis Enterprise software will cause the service to be deleted and the database will not be available (RED-99997) Avoid duplicating database names. Database creation via K8s has validation in place to prevent this.

• Installing the operator bundle produces warning: Warning: would violate PodSecurity "restricted: v1.24" (RED-97381) Ignore the warning. This issue is documented as benign on official Red Hat documentation.

• RERC resources must have a unique name (RED-96302) The string "rec-name"/"rec-namespace" must be different from all other participating clusters in the Active-Active database.

• Admission is not blocking REAADB with shardCount which exceeds license quota (RED-96301) Fix the problems with the REAADB and reapply.

• Active-Active controller only supports global database options. Configuration specific to location is not supported (RED-86490)

• Active-Active setup removal might keep services or routes undeleted (RED-77752) Delete services or routes manually if you encounter this problem.

• autoUpgrade set to true can cause unexpected bdb upgrades when redisUpgradePolicy is set to true (RED-72351) Contact support if your deployment is impacted.

• Following the previous quick start guide version causes issues with creating an REDB due to unrecognized memory field name (RED-69515) The workaround is to use the newer (current) revision of Deploy Redis Enterprise Software for Kubernetes.

• PVC size issues when using decimal value in spec (RED-62132) Make sure you use integer values for the PVC size.

• REC might report error states on initial startup (RED-61707) There is no workaround at this time except to ignore the errors.

• Hashicorp Vault integration - no support for Gesher (RED-55080) There is no workaround for this issue. Gesher support has been deprecated.

• REC clusters fail to start on Kubernetes clusters with unsynchronized clocks (RED-47254) When REC clusters are deployed on Kubernetes clusters without synchronized clocks, the REC cluster does not start correctly. The fix is to use NTP to synchronize the underlying K8s nodes.

• Deleting an OpenShift project with an REC deployed may hang (RED-47192) When an REC cluster is deployed in a project (namespace) and has REDB resources, the REDB resources must be deleted first before the REC can be deleted. Therefore, until the REDB resources are deleted, the project deletion will hang. The fix is to delete the REDB resources first and the REC second. Then, you can delete the project.

• Clusters must be named 'rec' in OLM-based deployments (RED-39825) In OLM-deployed operators, the deployment of the cluster will fail if the name is not "rec". When the operator is deployed via the OLM, the security context constraints (scc) are bound to a specific service account name (namely, "rec"). The workaround is to name the cluster "rec".

• Readiness probe incorrect on failures (RED-39300) STS Readiness probe does not mark a node as "not ready" when running rladmin status on node failure.

• Internal DNS and Kubernetes DNS may have conflicts (RED-37462) DNS conflicts are possible between the cluster mdns_server and the K8s DNS. This only impacts DNS resolution from within cluster nodes for Kubernetes DNS names.

• K8s-based 5.4.10 clusters seem to negatively affect existing 5.4.6 clusters (RED-37233) Upgrade clusters to latest version.

• Node CPU usage is reported instead of pod CPU usage (RED-36884) In Kubernetes, the reported node CPU usage is the usage of the Kubernetes worker node hosting the REC pod.

• An unreachable cluster has status running (RED-32805) When a cluster is in an unreachable state, the state remains running instead of triggering an error.

• Long cluster names cause routes to be rejected (RED-25871) A cluster name longer than 20 characters will result in a rejected route configuration because the host part of the domain name exceeds 63 characters. The workaround is to limit the cluster name to 20 characters or fewer.

• Cluster CR (REC) errors are not reported after invalid updates (RED-25542) A cluster CR specification error is not reported if two or more invalid CR resources are updated in sequence.

On this page